The Evasafe Repeater Panel Types EPL 4010 were designed for use with the Evasafe EPL 2000 Multizone Fire Alarm Panels, but can also be used with other fire alarm panels giving +ve fire alarm repeater outputs of between 2 and 24v.D.C.
The Repeater Panel requires a +24v D.C. supply and 0 volt return plus the individual zone inputs. Up to 20 repeater panels may be used with Evasafe EPL 2000 Multizone Fire Alarm Panels.
2.1. Connecting Repeater Panel 4010 to Evasafe EPL2000 Multizone Fire Alarm Panels
2.In order to test the operation of the Repeater Panel connect the +24 and OV lines ONLY to the terminal block. Connect a link between the +24 supply input and each of the zone and system fault inputs in turn. The corresponding L.E.D. should light.
It is important that the Installation Card supplied with this equipment is completed and posted as soon as the equipment is installed. This will ensure that both user and installer are kept informed of equipment modifications etc.
For further information or technical assistance contact as below,
Evasafe Products Limited, Farren Court, Cowfold,
Horsham, West Sussex, RH13 8BP, UK
Telephone 01403 864 676
Fax 01403 864 873