EVASAFE FIRE SYSTEMS

AUDIBLE AND VISUAL ALARMS

We manufacture and/or supply a wide range of audible and visual alarms.

A few examples are shown below, but there are many other variants available.
       
Xenon flashing beacon

Xenon flashing beacons available in 2, 5 or 10 watt, 24 or 50v versions.

We can also supply rotating and mains operated beacons.

e.g.

  • 06-201 2 watts 120 flash per minute, 24v.d.c.
  • 06-202 3 watts 120 flash per minute, 24v.d.c.
  • 06-203 10 watts 120 flash per minute, 24v.d.c.
Sounder EPL12600  Type EPL12600 Electronic two-tone sounder manufactured by Evasafe.

STANDARD SOUNDER
 

Standard 2 tone sounder used on most Evasafe fire alarm systems, type 03-201. Click here to hear this sounder

  
 Sounder for use with Series 65 fire detectors
05-550 SERIES 65 SOUNDER BASE, 32 TONES WITH DIODE

 

We can supply many variations including multi-tone, slow whoop, siren and bells.

COMBINED SOUNDER AND BEACON UNITS

We produce 2 versions of these, one being a simple combination of the standard sounder and a 2 watt beacon, for use in intermittently noisy areas such as back-up engine rooms, (item code EPL12100) the other (item code EPL12000) being an automatic sounder to beacon unit. This changes over from a sounder to beacon alarm after a pre-set period, normally about 5 seconds. It is intended for use in customer facing areas where disturbance from testing must be kept to a minimum. It was originally developed for use on 2 stage systems, which allows the alert signal to operate the unit as above, but the evacuate gives continuous sounder operation.

SOUNDER/BEACON UNIT

For more information email us - info@evasafe.co.uk

Back to Home Page

Page last updated 25 OCT 2006

Copyright Evasafe Products Limited 2000-2006