• ATTRACTIVE DESIGN
• COMPACT AND ECONOMICAL
• INEXPENSIVE INSTALLATION AND TESTING
• SIMPLE TO USE
• HIGH RELIABILITY
• VERY LOW POWER CONSUMPTION
• FULLY COMPLIANT WITH BS5839 Part 4.
• MANUFACTURED TO ISO9001 QUALITY STANDARDS
• AUTOMATIC AND MANUAL FAULT MUTING
• 2 ALARM SOUNDER CIRCUITS
• GENEROUS 500mA TOTAL SOUNDER CURRENT
• EXTENDED STANDBY
• ALL UK CONSTRUCTION
• MAXIMUM WEIGHT kg INCLUDING 3AH SLA BATTERIES
• WEIGHT LESS BATTERIES kg
• DIMENSIONS - 281mm x 178mm x 75mm deep.
• OPTION OF REMOTE RESET FACILITY

2-8 ZONE PANEL EPL2130-8

• Meets BT FP1063.1
• Meets BS5839 Part 4
• 1 - 8 zones
• Full zone isolation by removal of zone cards.
• Full sounder line isolation by unplugging sounder monitor card.
• 24 or 50v operation.
• 2 stage or 1 stage, plug selectable.
• 2 wire reversible sounder operation.
• Low voltage sounder monitoring.
• Remote reset facility.
• Optional fault extension.
• Optional automatic change over Alert to Evacuate timer.
• Optional active end-of- line facility.

BATTERY CHARGER EPL3000

• Twin one amp outputs, one for control panel, one for alarm load.
• Links directly to BT standard control panels.
• Room for 2 off 12v 4AH sealed lead acid batteries within enclosure.
• Full voltage and battery monitoring.
• Links directly to BT standard control panels.
• Standard 24v.d.c. output
• Automatic emergency change-over if control panel regulated supply fails.
• Internal high/low voltage LEDs
• Supplied with security screws to reduce anauthorised tampering.
• Standard Colour - red with grey front panel
• As supplied to British Telecom and various Government agencies.
• Meets BS5839 Part 4:1988

REPEATER PANEL FOR ABOVE CONTROL PANELS

The Fire Alarm Repeater Panel EPL4010/8 is designed to complement the Fire Alarm Panels EPL2130/8, but will work with any panel giving repeater outputs of between +12 and +24v when in the fire/fault condition.

For normal, discrete wiring, 1 core per zone is required, plus a further 3 for power and fault. For long cable runs, where a fire resisting cable is required, a multiplex option is available, which only requires 3 cores.

The Fire Alarm Repeater Panel EPL4010/12 is designed to complement the Fire Alarm Panel 2130/14, but will work with any panel giving repeater outputs of between +12 and +24v when in the fire/fault condition.

For normal, discrete wiring, 1 core per zone is required, plus a further 3 for power and fault. For long cable runs, where a fire resisting cable is required, a multiplex option is available, which only requires 3 cores.

The receiver for this will easily fit within the repeater, and the transmitter has been designed to fit within the control panel. A further data sheet is available if more details are required.

The Fire Alarm Repeater Panel EPL4010/26 is designed to complement the Fire Alarm Panel EPL2130/26, but will work with any panel giving repeater outputs of between +12 and +24v when in the fire/fault condition.

For normal, discrete wiring, 1 core per zone is required, plus a further 3 for power and fault. For long cable runs, where a fire resisting cable is required, a multiplex option is available, which only requires 3 cores.

The receiver for this will easily fit within the repeater, and the transmitter has been designed to fit within the control panel. A further data sheet is available if more details are required.

• Up to 26 zones plus fault/sounders silenced.
• < 1mA drawn from zone outputs.
• Works from 12 - 24v.d.c.
• Optional multiplex receiver will fit within.
• Easy to test and install.

These have been developed for use in larger systems. They incorporate an integral charger, with space for 6AH SLA batteries.

• Up to 26 zones.
• 2 stage option.
• Single stage output.
• Easy conversion to single stage.
• Uses same boards as 8 zone panels.
• Zones and sounders easily isolated.
• 4 options available, as per EPL2130 panel.

• 4 amps output current as standard
• Room for integral 6AH SLA batteries.
• Fan cooled version available for hotter climates.
• 6 amp version also available.
• Alternative enclosure allows use of 17.2AH SLA batteries
• Standard unit same size as EPL2000 - 8 panels.
• Full monitoring of voltage and battery faults.

• Easy to operate.
• Key operated emergency override.
• Anti-tamper device included.
• Exit press switches on "secure" side of doors.
• We can supply complete kits of control equipment and door locks, door switches, indicators and cables.

 This system is used where enhancement of speech is required, such as in protected interview booths.

The system is a fully 2 way duplex type. Click on the link above for more details.